ETS-Lindgren's HI ELF Survey Meter is a magnetic field probe designed to evaluate both electric and magnetic fields associated with 50/60 Hz power lines. ETS-Lindgren Inc. Trademarks used in this document: The ETS-Lindgren logo is a trademark of. ETS-Lindgren, Inc. Revision Record | HI Survey Meter.
HOLADAY INDUSTRIES, INC. WARRANTS EACH MODEL HI ELF.
SURVEY METER TO BE FREE FROM DEFECTS IN MATERIAL AND. WORKMANSHIP.
Thenon-magnetic nature of the human body does not perturb themagnetic field nor interfere with the operation of the sensor. Figure illustrates yet another application of the HI- inthe measurement of the magnetic field waveform caused by thevertical deflection circuits in a typical video display terminal VDT.
The display response setting is stored in the non-volatilememory of the HI and if the setting is changed, the newsetting will be saved and will become the default condition. The oil and water interface meters by Heron, Solinst and Geotech are appropriate for monitoring and remediating oil-contaminated groundwater, wells and tanks. The instruments in this section are ideal for performing clean room inspections, surveying confined space conditions, detecting and identifying potentially hazardous working environments, water quality analysis and ventilation studies.
This XRF analyzer utilizes a rugged x-ray tube instead of radioactive isotopes, drastically reducing radiation licensing issues and may be carried and shipped without hazardous materials restrictions.
On turn on, the cursor islocated above the leftmost of the three columns of functions onthe control panel.
Download scientific diagram | HI ELF survey meter from publication: Study of Magnetic Fields Produced by Transmission Line Tower Using Finite Element. HI ELF Survey Meter. Specifications. Frequency Range.
30 – Hz. Frequency Response. ± dB (Hz). ± dB (Hz).
Please note that the lowbattery symbol indication on the HI display refers to thebattery condition of the HI The Tramex Survey Encounter Moisture Meter uses the principal of non-destructive electrical impedance to find moisture behind and underneath wood, plaster, brick, carpeting, vinyl flooring, ceramic tile and even behind drywall.
HI ELF Survey Meter
Are you sure you want to Yes No. The data link between the HI and the HI is a plasticfiber cable. The instruments in this section are ideal for performing clean room inspections, surveying confined space conditions, detecting and identifying potentially hazardous working environments, water quality analysis and ventilation studies. Forthis reason, we recommend that you check the display responsesetting when you first receive the instrument and after batteryreplacement.
Thissignal is a DC voltage proportional to the indicated field value.
CHARGED OFF ACCOUNT MEANINGS
|At any particular point in space, the field can bedetermined by the superposition of the fields associated witheach conductor; because the voltage and current of eachconductor is out of phase with that in any of the others, and theconductors have some finite spacing between them, theresulting electric and magnetic fields are calculated on the basisof the vector sum of fields caused by each of the threeconductors.
Figure When immersed in anelectric field, charge is redistributed among the two paralleldisks such that the electric field between the two disks remainsat zero. Replace with 9 volt alkaline NEDA A, Duracell MNor equal being careful to observe proper polarity of each battery refer to the label on the bottom of the readout module case forproper orientation of the batteries. MAX C.
Meters and Monitors for ELF-VLF Applications. Product Holiday provides a wide selection of low frequency thatons powering the HI ELF Survey Meter.
Present study aimed at determining ELF-MFs flux densities near schools in.
Video: Holiday hi-3604 elf survey meter Using LUDLUM 2401-EC radiation meter in airplane.
To obtain the required is noteworthy that HI meter measures ELF-magnetic.
Embeds 0 No embeds. This allows a total of nine 9 differentfunctions to be assigned to the three keypads.
Please note that the lowbattery symbol indication on the HI display refers to thebattery condition of the HI This maximum reading is indicated as long as the MAX keypadis activated.
The Proceq Profometer 5 utilizes the eddy current measuring method with pulse induction to ensure a high measuring stability.