Drum Bearings. Not too difficult, and not too expensive. All General Electric, or GE, dryers, come in a front-load style. Thanks for the help everyone! This will hopefully stop the metal from screeching as the drum turns. If the problem is in fact the dryer motor, you may need to have a long conversation with yourself about your relationship with your current dryer.
How To Fix Noisy Dryer Dryer Repair
Here is our guide to fixing a squeaky dryer. The main culprits are normally the belt, the idler pulley, the drum bearing, or the motor itself.
The causes of a squeaking GE dryer could be the belt, the drum bearing, the idler pulley, or the dryer motor. Diagnosing the cause of a squeaky clothes dryer is often more difficult Most squeaks are drum-related, meaning the problem is with the rear.
I found the parts on e-bay, and had it fixed pretty quick.
Squeaking DryerWorth Repair Home Improvement DSLReports Forums
However, if it is just the wheel bearing, it can be lubed with a lithium spray grease. The top, the back panel or at the floor level. Quick Question!
The main culprits are normally the belt, the idler pulley, the drum bearing, or the motor itself.
How to Fix a Squeaky Dryer Digital Trends
This is a view through a little screw-off panel on the back of the machine: hard to see but the belt comes over the big pulley and under the motor shaft.
How to Fix a Squeaky Clothes Dryer (Best Selling Cloth Dryer) Most squeaks are drum-related, meaning the problem is with the rear bearing.
In some models of gas and electric dryers, the drum is supported a squealing or squeaking noise and will need to be replaced.
However, if it is just the wheel bearing, it can be lubed with a lithium spray grease.
Note: all of these basic repairs will start with this exact same process.
Video: Repair squeaky dryer drum How to Fix a Noisy Dryer - Troubleshooting and Repairing
Drum Bearings. You should now be able to remove the front panel of the unit. Fast Delivery 1.
I know what I usually find is under the drum, there is a metal bracket sticking up that has a pulley on it that holds tension on the belt, that could be worn as well bearings.